LED 600 x 700mm Mirror Cabinet Storage Wall Mounted Bathroom Cupboard

The mirred, LED lights around the edge of the mirrors look really fantastic. Using a sensor to turn the LED lights on and off, altering the brightness is okay, but where yo have gone seriously wrong is by putting the demister in with the same sensor. The demister is on all the time the LED lights are, which is not necessary, as the demister is only needed occasionally. Putting the demister and the LED lights together on one sensor is wasting people's electricity EVERY time the LED lights turn on. If I had known about the demister being turned on with the LED lights, I probably wouldn't have purchased this mirrored cabinet. You need to seriously consider putting ALL the controllers for the on/off for LED lights, the brightness and maybe the colour of the LED lights separate and the demister separate also, ALL into sensors in the glass of the front mirr of the cabinet, like 98% of your competitors are doing. Next thing is the adjustable shelves need to be changed. The single mounting bracket that are used in one routed slot is abysmal. Adjustment of them using a number on screwdriver will strip out the head easily for anybody who doesn't have a lite touch, but is also strong enough to turn the screw in a bad design. Only one mounting position allows the shelves to rock back forth whis an unsafe way to have glass shelves. Your company would be best off having two pegs in each end with adjustment holes in to have the shelves sit on the wood. Quality control needs to be increased. The holes for the screws holding the door brackets to the doors and the cabinet are mostly stripped out. They needed to be filled with some wood and wood glue, because as they were being adjusted, they wouldn't tighten. I hope your company takes note of what I have said, as making the changes I've noted will help to make more sales and better reviews.